If the item is there, you are done with the driver install. Check if there is an item called Qualcomm HSUSB QDLOADER 9008. Go to device manager, expand PORTS (COM & LPT). Follow the defaults, press NEXT until it finish the installation.Ĭonnect Deadboot Flare(s100) to Computer / Laptop. Press install when it prompt to install additional Visual C runtime libraries. Extract QPST-2.7.399.rar and run SETUP.EXE. Proceed to Flash Jellybean BP Firmware and then Flash Jellybean IMG Dump.“If error is COOKIE NOT RECEIVED, Sorry it is still bricked”.“This tutorial will also fix CWM formatted boot partition”.ĭOWNLOAD LINKS. Or “Cookie not Received, if the error is “Timeout Waiting” Press OK and then press “Switch Device to Load, check your phone (S100), it will show “Reset for entry QPST”. A warning message may appear, “Timeout Waiting” etc. Press Load Patch Def, navigate to your extracted JB Firmware, select patch0, then press OPEN. Press Load XML Def, navigate to your extracted JB Firmware, select rawprogram0, press OPEN. Under “Boot Image”, enter 8X25msimage.mbn.

Under “Flash Programmer File name”, select “MPRG8X25.hex. Put check mark on “Program bootloaders, Program MMC Device, Trusted”. Look for the PHONE TAB that says DOWNLOAD and press OK. NOTE: If you are using Windows 7, make sure you run it under compatibility mode in Windows XP SP3, and run as Administrator. It should be now listed under COM PORTS Qualcomm HSUSB QDLOADER 9008.RUN QPST AND RE-PROGRAM EMMC.

After little process of instalation says it can not be installed and its not present and can not open and abort instalation. QPST.2.7.474 QUALCOMM Delete Old version! Hi sir, Latest version.460 can not install on windows 7 64bit. The benefit of using QPST flash tool is that it supports multiple devices from a range of manufacturers. This means, with QPST flash tool, you can download latest stock firmware and flash it onto your phone or tablet. It will install the driver, if it prompts for unsigned drivers, press “Install Anyway”. Double Click “Unknown Device Update Driver Browse My Computer” Browse to the where you saved extracted Jellybean / ICS Drivers. If there is no item under PORTS(COM &LPT), check device manager under “Other DeviceUnknown Device”. Go to device manager, expand PORTS (COM & LPT).Ĭheck if there is an item called Qualcomm HSUSB QDLOADER 9008. Connect Deadboot Flare(s100) to Computer / Laptop. Press install when it prompt to install additional Visual C runtime libraries.įollow the defaults, press NEXT until it finish the installation.

Qpst tool versi 2.7.399